This cabinet was used for Gulbransen organs. I'm wondering if the console puts out a hotter signal than my guitar. I'm not getting a ton of volume from any one of them. Now I have to figure out if I want to tie them all together or have 1 for the top three 6x9s, 1 for the 15, and another for the three 6x9s in the drum.Īlso, how many watts is each of these channels putting out. In fact, I have soldered separate 1/4 inch inputs for each of the channels and tested them. I figured out the other 7 pins that come from the console. They come from the console to the 9 pin input and then go directly to the 7 pin output plug to the 'speaker connector chassis'. What I don't know is the purpose of #6 and #7 on the schematic. I need to get a new spinning connector for the bottom of the rotating drum. I have figured out which channel operates which speaker. So far, I have scanned and redrawn the schematic before the one on the amp vaporizes. I was given a Leslie 101 from a guy who had it stored in his garage for years.I play guitar in our band at church and am in the process of converting it to take guitar input(s).Sorry if this is a slap in the face to the organist community, but I've become a real tube amp nut and this thing really has my interest.
